AQUAFLEX

Finishing

AQUAFLEX is a new concept of wall decorative paint, with a wide range of chromatic effects, “satin sheen” finish, to be applied by spray-gun.

Recommended for the following locaions

Particularly recommended for use in locations subjected to hard wear and tear, such as hospitals, schools, banks, public buildings, offices, shops, apartments, kitchens, hotels, etc

Surface Preparations

Apply AQUAFLEK on surfaces such as cement, plaster, brickwork and concrete. Surfaces have to be prepared as traditional paint. Surfaces must be clean and dry. Extremely porous surfaces, apply a primer coat of sealer as pre-treatment (ISOFARB-ACR). For perfect uniformity of the surface, apply a previous coat of emulsion paint like EUROTOP.

Applicaion Method

• Base: apply the proper pre-treatment coats (see above)
• Prepare AQUAFLEK in the desired colours.
  • Ex.: Series 2000 – 1 part of AQUAFLEK series 1000 + 1 part of AQUAFLEK G1000 white
  • Ex.: Series 5000 – 1 part of AQUAFLEK series 1000+5 parts of AQUAFLEK G1000 white
• Apply AQUAFLEK by means of a volumetric compressor with spray gun nozzle diam. 2-2,5 mm. Keep a distance of 30-40 cms from the surface. Apply two coats with the criss-cross technique.
• IMPORTANT: AQUAFLEK is ready to use. In case of dilution do not use more than 5% water
• Drying: 2-4 hours to the touch, 24 hours for total drying. Washable in 10 days

Consumption

200÷25o ml/m²

Packing

Packing available in 5 lt – 200 lt – 1000 lt

Base AQUAFLEK G1000 white