FARBEL

Finishing

FARBEL is the modern version of the antique “VENETIAN STUCCO” that creates this elegant decoration in high value interiors.

Recommended for the following locations

Decoration recommended in high valuable interiors such as museums, banks, villas, luxury apartments and flats, shops, renovations professionals studios, etc.

Surface Preparations

Apply FARBEL on clean and dry surfaces, free of greasy substances or any other contaminants. Mechanically remove all loose, flaking coating and materials. Walls such as cement, plaster, and brickwork, concrete should be prepared as traditional painting. Extremely porous surfaces should be treated with a primer coat of sealer as pre-treatment (ISOFARB-ACR/2).

Application Method

• Base: apply one or two coats of white MEHLPLAST to achieve uniformity
• FARBEL is available in 35 colours + 1 WHITE BASE
• Apply FARBEL with a stainless spatula, in small “spots” of low thickness, one far from the other. Then, before FARBEL is completely dry, proceed to polish the surface by rubbing down with the spatula, exerting a slight pressure.
• Repeat the operation until the surface is completely covered.

Consumption

330÷500 gr. /m²

Packing

Available packing: 5 kg – 25 kg